Johannesburg, 03 March 2022 – You may be wondering how to prepare your house or your business for load-shedding. This guide provides ideas for you to consider – some of which are easy and affordable.
DO THE EASY THINGS FIRST
- Check the load-shedding schedule to plan your electricity usage. Buy a small gas cooker if you don’t already cook with gas.
- Make sure that your electronics, like your cell phone and laptop, have sufficient battery life.
- Buy a solar cell charger, a car phone charger, or a cell phone power bank.
- Buy rechargeable lights . They last for up to 10 hours when fully charged.
- Buy a surge protector plug for your television, computer and fridge. This will protect your appliances when the power comes back on.
RESEARCH WAYS TO “LOAD-SHED PROOF” YOUR HOUSE.
Calculate the daily minimum amount of electricity needed for the household.
Do you need the lights, fridge, and TV on? Or only the lights and TV?
- You can then find out how much electricity each appliance needs.
- With lights, identify the wattage of your lights (it is usually printed on the globe itself).
- With appliances, find the labels on the appliance that state the power usage.
Kettles and electric stoves use a lot of electricity over a short period of time, so it’s best not to include these. You can rather use a gas stove to heat your water or cook your food. It is also best to exclude your geyser, as it uses a lot of electricity.
Now that you know how much power you will need, find out what the different options will cost you.
Load-shedding can last for between two and four hours at a time. Therefore, an ideal battery system capacity of five hours should be sufficient.
A battery backup system consists of the following components:
BATTERY CHARGER
Charges the rechargeable batteries from the AC mains power while there is no load-shedding.
Note: Sometimes the battery charger is built into the inverter.
INVERTER
Converts the DC battery power into usable AC power during load-shedding. Use an approved inverter. Grid-tied inverters must be registered with the municipality and installed by a qualified person.
BATTERY
Stores the electrical power for later use.
Compliance requirements:
If your battery system is a standalone appliance that you plug devices into, there are no compliance issues. If your battery system (including inverter) is interconnected with the wiring of your house, it must be declared via the municipality’s SSEG process to confirm that EITHER it is operating safely as an off-grid system OR it is compliant and authorised as a grid-tied system (usually in conjunction with PV). Use an inverter approved by your municipality and installed by a qualified person.
The size of the battery system will depend on the equipment to be powered during load-shedding.
An inverter that can provide 1 000 Watt (10.5A) continuously output and around 600Wh energy will be required if you need very limited usage with an average load of 240W, for example :
- 4 to 6 LED or Compact Fluorescent lights (CFL) amounting to 24W for LEDs or 45W for CFLs
- A TV and a decoder use 30W when off and 150W when in use
- A cell phone charger uses 0.5W not charging and 6W when charging
RCT MEGAPOWER MP-T1000S INVERTER TROLLY OR PORTABLE OPTION RCT MEGAPOWER MP-PBS160AC POWER BANKS
An inverter that can provide 2 000 Watt (10.5A) continuously output and around 1.2 kWh energy will be required for an average 3-bedroom house where the usage will be limited to an average load of 480W.
- 10 to 15 LED or CFL lights
- A TV and a decoder use 30W when off and 150W when in use
- One energy-efficient fridge / freezer on, managed well, will consume 100W – 200W
- A laptop uses 65W while charging
RCT MEGAPOWER MP-T2000S POWER TROLLY
An inverter that can provide 5600 Watt (17 A) continuously and around 4.8 kWh energy will be required for bigger houses, small offices and shops that want to be unaffected by load-shedding. This option will be limited up to a load of 1500W.
- All lighting and a TV will be operational
- Multiple fridges and freezers can be operated, but must be opened as little as possible
- Laptops and a printer can be used
RCT-AXPERT 5.6K MK4 INVERTER WITH DYNESS A48100 4.8KWH LITHIUM BATTERIES
With all three options, all cooking – including the boiling of water – is achieved using gas and not electricity. In addition, none of these options will be able to power geyser.
A qualified electrician can install the battery and connect it to certain circuits, so that only some items are powered during load-shedding.
Alternatively, you can buy a stand-alone uninterrupted power supply (UPS) backup battery system, which allows you to plug in one or more items (similar to a generator). RCT has a number of options available starting at R 5,999.00 for 1000W inverter and battery. For more information go to www.rctzone.co.za/power-solutions/
Video: HOW TO BEAT LOAD -SHEDDING AT A PRICE YOU CAN AFFORD:
CLICK HERE to submit your press release to MyPR.co.za.
More Info on HOW TO BEAT LOAD -SHEDDING AT A PRICE YOU CAN AFFORD here: https://rctzone.co.za/power-solutions/
Twitter:
Facebook:
Submit your Press Release for free to MyPR here: MyPR Free Press Release Submission.